Home > Disc Read > Ps 2 Error

Ps 2 Error


The INDEX identifies the selector (if any) that is associated with the exception. Dennis McKinney (#2152) December 10th, 2005 Many Many thanks, I think you just saved me some money and made a couple of young kids very happy. Club Soda and Salt » Blog Archive » You can thank me later July 21st, 2006 Carlito Corway (#2530) July 22nd, 2006 I have repaired many Play Station 2 consoles which these steps can prevent the disc read error. :] cherrzz man Was this answer helpful?

But for future information, Both gears need to be turn equally to adjust. Assuming that the diagnostics find nothing (quite likely), remove all adapters except the display card and the FD/HD controller, re-run SETUP (if necessary), and try both cold and warm boots. PS/2 - last 8042 command not accepted PCC - DMA controller failure 106 (PS/2) Converting logic test failure 107 Interrupt failure on 339 AT Remove cards one at a time until Thanks so much for saving me a lot of money! http://www.instructables.com/id/How-to-Fix-the-PS2-Disk-Read-Error/

Playstation 2 Troubleshooting Disc Read Error

The guide said if this doesn't work (which mine didn't) the problem could be that the laser is damaged due to the wrong laser voltage. I’ve seen numerous guides saying the same thing but it still does not work??? DVDs and CDs got the same error.

  • Is this true?
  • So I used a cloth to clean off the rail until all the tackyness was gone, lightly oiled it and put it back in.
  • Please help me.
  • Make sure that your PS2 is unplugged to avoid risk of shock. 4 Step 4: Adjusting the Optical LensRemove the disk cover and plug in the PS2.
  • Internal Processing Error -- Message issued by OS/2 DOS box when a program running in the DOS box corrupts the DOS environment. 2. 113 DOS Internal Stack Overflow -- DOS error

They helped alot for me to get in there and id the problem. Carefully pull up on the chip. g.i.p fun colors (#2513) July 14th, 2006 hey man what up am having problem with my ps2 i don’t seem to have the white gear. Ps2 Disc Not Reading Then slide the laser back down again and make sure it pushes the piece back in.

If a stuck key was detected, the scan code for the key is displayed (as "301 xx" or "xx-0301"). 301 (PCC) xx Stuck key detected (xx indicates internal scan code) (PS/2) Ps2 Slim Disc Read Error Put all memory and memory expansion cards in the system unit with the display adapters and the async adapter in the expansion box. I have tested this process on two Playstation 2s now and it completely fixed the errors both were experiencing. I unplugged all the cords and plugged back in, switched outlets.

Click the button below to indicate that you agree to these terms, which will unblock your account. Ps2 Disc Read Error Easy Fix CS:IP usually points to the failing instruction. If keyboard activity does not occur or if external power is not supplied to the system unit within the 2 minutes, BIOS automatically suspends the application and powers off the system then chances are it's not a serious error and only requires minor adjustments to your PS2.

Ps2 Slim Disc Read Error

As you adjust you see the laser raising so its closer to the disk. https://www.ifixit.com/Wiki/PlayStation_2_Troubleshooting After that it never would turn on. Playstation 2 Troubleshooting Disc Read Error I also impressed my kids, they now think daddy is a real genius. How To Make A Ps2 Read A Disc Grab your PS2, a normal-size Phillips and a flathead screwdriver, a small or jeweler's size Phillips screwdriver, a can of compressed air, and one each of (if you own any): a

I have found the right setting for the wheel so as to play all four types of discs that a ps2 can play, however, after I put it back together, I It started off with Grand Theft Auto: San Andreas where it loaded really slowly and made the grinding and clicking noises. Turn off the ps2 with the master switch. 6. Phone # for sony: 1-800-345-sony(complements to wackoss)Now hopfuly that fixed your problem if it did't then you could send it back to sony(do this if you still have a warenty or Ps2 Disc Read Error Fix Without Opening

Typically, this error is seen immediately after moving or recabling your system. Trap reports seem to follow the Intel exceptions fairly well. This worked the first time! Sam (#2032) June 28th, 2005 i have a SCPH-30001 model (or at least the back of my ps2 says so) but when i get to the part where i take the

You will not be able to run SETUP. Ps2 Disc Read Error Guaranteed Fix Loading... rob1101Member Since: September 18, 2004Posts: 3435rob1101FollowForum Posts: 3435Followed by: 0Reviews: 0 Stacks: 0Forum Karma: 0#39 Posted by rob1101 (3435 posts) - 11 years, 22 days agoWhen i placed my PS2 vertically,

doc_tonicMember Since: October 12, 2005Posts: 292doc_tonicFollowForum Posts: 292Followed by: 0Reviews: 0 Stacks: 0Forum Karma: 0#42 Posted by doc_tonic (292 posts) - 11 years, 11 days ago hey i am new to

anyone know what i can do? it just takes some dexterity and patience, because the sony guys hid this connection real well. Dell0304 766,333 views 10:00 PS2 Slim Laser unit replacement - Duration: 8:29. Ps2 Disc Read Error Clicking Sound Remove the disc tray carefully.

You tottaly just made my night. This is a latching error; once the error is detected, the system will no longer try to move the ROM to RAM until diagnostics (SETUP) are run to clear the error. Is it something wrong with the lens? If you hear a clicking or grinding type noise when you hit eject on your drive, or while a game is playing, chances are your laser gear is either worn out

Either remove the card or correct the network problem. 3020 LAN Network ROM BIOS Failure 3041 LAN Network Continuous RF Signal Detected 3042 LAN Network Continious RF Signal Sent -- Replace Follow me on Twitter or Google Plus Copyright ©2016 · Focus Pro Theme on Genesis Framework · WordPress · Log in 3DS DS iOS PC PS3 PS4 PSP Switch Vita Wii and i am having problems sometimes when i play, a red screen appears then i turn the console off then on and the game works, is this normal? Another common cause of the C0000005 error -- you have an advanced video adapter (8514/A, XGA, Image Adapter) installed and configured under OS/2, but your display is plugged into the planar

Remove the 4 screws to it. 6. After taking the machine apart it became obvious that the problem had something to do with the mechanics of the laser and how it moves to read the disc. ERLIM and ERACC are apparently the access code and limit for the suspect selector. I’ve been suffering from this error for some time.

It's rather easy to take out the whole fan and power button, as well as the front disc eject and reset buttons. Anonymous (#2546) August 1st, 2006 for everyone who’s ps2 won’t turn back on anymore: what probably got disconnected was the I/O cable connecting the top case to the bottom case. rain (#2269) February 21st, 2006 Same as Comment #55. I thought i broke it even more.

rob1101Member Since: September 18, 2004Posts: 3435rob1101FollowForum Posts: 3435Followed by: 0Reviews: 0 Stacks: 0Forum Karma: 0#32 Posted by rob1101 (3435 posts) - 11 years, 29 days agoit used to happen to me