Home > Error Occurred > Raid 0 Error 0

Raid 0 Error 0

Contents

You can not post a blank message. My symtoms were slightly differenrt than your, mine would randomly lock up. Take back both hard drives and sell a spare case, then buy another monitor and a average hard drive just so I can play games. (I will have a 3 monitor Raid 0 - Error Occurred (0) Help Please. http://caribtechsxm.com/error-occurred/raid-0-error-fix.php

Before the problem it just boot right up with out the request. I am hoping it is my hard drive that is to blame and not my motherboard. XP Professional. What does it mean?

Intel Rapid Storage Technology Raid Error Occurred (0)

This is what threw me off. Today I did a Windows restart and so far so good. paptimusMar 22, 2008, 11:43 PM Thanks for your responses guys!Popped in my Vista64 disc, ran the system repair utility, heck it even detected the drive/system as Unknown but it got the

John wrote: > Intel ICH86/DO/DH SATA RAID Controller: > Driver date: 5/11/06 > Driver version: 6.0.0.1022 > > JMicron JMB36X Controller: > Device type: SCSI and RAID controllers > Manufacturer: JMicron Processor: i7 3930K @ 4Ghz Motherboard: Asus Rampage IV Extreme Black Edition Cooling: Custom, Liquid Cooled. See why it earned our Editors' Choice award. Raid Error On Boot Up User Name Remember Me?

Disabling one controller in BIOS will result in a boot error if you disable the one with the disks attached (no drives found or some such error). Intel Matrix Storage Manager Error Occurred 0 Raid 1 Thanks for all your replies guys, it saved me from going getting another drive. Lumber-jackJan 5, 2014, 12:05 AM back up now before you attempt to do anything... Mike #11 (permalink) 01-08-2007, 03:59 PM John Guest Posts: n/a Re: "Error Occurred(0)" with RAID 0.

Re: raid - Error Occurred(0) millersh Apr 27, 2011 12:04 AM (in response to permidion) It's certainly not the case that you can't switch disks to different ports.On my home computer, Dell Raid Error Occurred 0 I just installed the newest Intel Matrix Storage Manager 7.6 in Windows Vista Ultimate in a RAID-0 setup. In comp.sys.ibm.pc.hardware.storage John wrote: > During boot up, one of my two week old hard disks in my RAID 0 is now > reporting this error: > "Error Occurred(0)" > Since it's a RAID0 config, your drives will look like gibberish to the OS if you turn off RAID.

Intel Matrix Storage Manager Error Occurred 0 Raid 1

my question here is did you just fix the master boot record, or what did you repair in particular or was there a giant magic repair button? I ran the Western Digital diagnostics again and it says that everything is peachy. #12 (permalink) 01-08-2007, 04:22 PM Arno Wagner Guest Posts: n/a Re: "Error Occurred(0)" with Intel Rapid Storage Technology Raid Error Occurred (0) Thankfully I Googled my problem tonight and found this thread so that I don't waste a day reinstalling and configuring a new system again. (And risking anything else going wrong with Raid 1 Error Occurred 0 Dec 4, 2009 at 5:01 PM #6 AsRock TPU addict Joined: Jun 23, 2007 Messages: 14,329 (4.20/day) Thanks Received: 3,812 Location: US System Specs System Name: weeeeeeeeeeeeeeeeeee Processor: i5 2500k \

Video Card(s): EVGA GTX770 Hard Disk(s): Samsung 840 256GB & Intel 510 128 GB SSD, LCD/CRT Model: Westinghouse 24" L2410NM and Samsung 226BW 22" Case: Cooler Master HAF-XM Power Supply: HX1000 see here I backed everything up and I'll clone the dying drive to an identical replacement. But would not have high hopes as seen as it's a Raid 0 and there are not any repair options. Please type your message and try again. Ssd Error Occurred(0)

But I am also looking into a 80Gb Intel x25-m SSD for my boot drive, but I still have to think about things at the moment. That will be a lot to download but I don't see an option, I'm going from Vista 32bit to 8.1 64bit.After I get the new PC up and running would it I'm aware that SMART isn't directly accessible by the user or software with a RAID setup, but it seems that SMART still works within RAID and it is what the RAID http://caribtechsxm.com/error-occurred/raid-0-error.php System Specs System Name: i7 Rig.

Unfortunately nVidia motherboards using SATA/RAID have this problem too, but nVidia is being stubborn and won't admit to the problem. Physical Disks Error Occurred (0) Dec 4, 2009 at 2:15 AM #1 Conflict0s Joined: Dec 4, 2008 Messages: 399 (0.14/day) Thanks Received: 64 Location: United Kingdom. I got an rma from WD, they replaced the drive and the replacement drive is still running in another system years later.

UPDATE: So after I saw it was playing up I decided to finalise it by playing it until it crashed.

  • Second, in a two disk AID0 array, you have 3 points of failure, not two.
  • That can easily be fixed by running chkdsk, which is the first thing you should have done.
  • Mike #9 (permalink) 01-07-2007, 10:18 PM John Guest Posts: n/a Re: "Error Occurred(0)" with RAID 0.
  • Thats the part that throws me.
  • Error 0xc00000e9 , An unexpected I/O error has occurred, after cold boot solved Windows on non raid 0 HDD, and applications on Raid 0 storage still benefit?

I don't see what that would have to do with data corruption from overclocking failure. Anyway my system is fine, accept when I am gaming and it just does the same as before and crashes during game. I know this thread is old but I just had the same problem and would like to answer the last post.Yes delete the array taking note of the name of the Intel Matrix Storage Console Video Card(s): EVGA GTX770 Hard Disk(s): Samsung 840 256GB & Intel 510 128 GB SSD, LCD/CRT Model: Westinghouse 24" L2410NM and Samsung 226BW 22" Case: Cooler Master HAF-XM Power Supply: HX1000

bobbknightMar 22, 2008, 8:40 PM Back up, back up, back up, Especially if you are using a raid 0 configuration. 4745454bMar 22, 2008, 8:59 PM Quote: I've read several threads around And last time windows decided to do a check disk lost me a load of files. It only seems to happen adding video to itunes. http://caribtechsxm.com/error-occurred/raid-error-0.php Well I think my problem is virtually solved now, I will most likely open another thread in the overclocking section to try and get my overclock stable at a later date.

The rest of the tech industry new it was coming and did not put any resources towards it. Flag Permalink Reply This was helpful (0) Collapse - previous reply worked for me... Reinstalling the OS fresh fixed the Error Occured(0) on the raid. I will overclock my system in the future, but I just don't want to risk of this happening again if my overclock did effect this.Click to expand...

Glad to hear it didn't lose the array with the update! Discussion in 'Storage' started by Conflict0s, Dec 4, 2009. I didnt have any problems after marking the drive OK but you could lose data Dec 6, 2009 at 5:50 AM #14 Conflict0s Joined: Dec 4, 2008 Messages: 399 (0.14/day) But it does, so I am now making my backup and not complaining.

Anyway: I installed the Intel Matrix Storage Manager which IS compatible with my hardware (even though my hardware was very old - from 2004). probably more reliable than some other methods that may exist. All Rights Reserved Tom's Hardware Guide ™ Ad choices Articles & News Forum Graphics & Displays CPU Components Motherboards Games Storage Overclocking Tutorials All categories Chart For IT Pros Get ITunes did the same thing to me, although it only happened when importing video files.

Mines at 3.43Ghz and able to install the OS without issue but some have issue's trying it. So about 2 hours ago I uninstalled Left 4 Dead and then reinstalled it and it still crashed around 20 minutes in but this time only crashed the game and not Just wanted to add that another user is having this problem. If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post).

So how do you go to the Intel Matrix Storage Console when the system won't boot? Michael Daly wrote: > John wrote: > >> Intel ICH86/DO/DH SATA RAID Controller: >> Driver date: 5/11/06 >> Driver version: 6.0.0.1022 >> >> JMicron JMB36X Controller: >> Device type: SCSI and In here the drives show the reported error as well.